resetup led

README.md

@@ -1,4 +1,4 @@
-# Lunar Vein Arduino
+# Lunar Vein: Arduino
 
 An API server and client to communicate with Arduino boards, that's it. Idk about electronics and networking actually. But that piece of knowledge motivated me to interact it with other software. Enjoy (⁠づ⁠￣⁠ ⁠³⁠￣⁠)⁠づ
 

src/controller/index.d.ts

@@ -0,0 +1,15 @@
+
+export type digitalValue = 'ON' | 'OFF';
+export type voltage = 'HIGH' | 'LOW';
+export type sPinModes = 'INPUT' | 'OUTPUT' | 'ANALOG' | 'PWM' | 'SERVO' |'SHIFT' |'I2C' |'ONEWIRE' |'STEPPER' |'SERIAL' |'PULLUP' |'IGNORE' |'PING_READ' | 'UNKOWN';
+
+export interface ChannelPins {
+    pin: number,
+    value: digitalValue
+}
+
+export interface ColorChannel {
+    r: string,
+    g: string,
+    b: string
+}

src/controller/led.ts

@@ -1,15 +1,12 @@
 import { Request, Response } from "express";
 import { board } from "../setup";
+import { ChannelPins, digitalValue, voltage } from ".";
+import { digitalRead } from "../promises";
 
-export interface ColorChannel {
-    r: string,
-    g: string,
-    b: string
-}
 
 export async function readLed (req: Request, res: Response) {
     const { p } = req.params;
-    const pin = Number.parseInt(p);
+    const pin: number = Number.parseInt(p);
 
     if (Number.isNaN(pin)) {
         return res.status(400).json({
@@ -18,18 +15,23 @@ export async function readLed (req: Request, res: Response) {
         });
     }
 
-    const pinState = board.pins[pin].value == 1 ? 'ON' : 'OFF';
+    const pinState: digitalValue = board.pins[pin].value == 1 ? 'ON' : 'OFF';
 
     return res.status(200).json({
         status: 200,
-        message: `Pin ${pin} state ${pinState}`
+        pin_state: {
+            [pin]: pinState
+        }
     });
 }
 
 export async function writeLed (req: Request, res: Response) {
     const { p, a } = req.params;
-    const act = a.toLocaleLowerCase();
-    const pin = Number.parseInt(p);
+    const act: string = a.toLocaleLowerCase();
+    const pin: number = Number.parseInt(p);
+
+    let state: digitalValue;
+    let volt: voltage;
 
     try {
         if (Number.isNaN(pin)) {
@@ -41,20 +43,108 @@ export async function writeLed (req: Request, res: Response) {
     
         switch (act) {
             case 'on':
-                board.digitalWrite(pin, board.HIGH);
-                console.log(`${req.hostname} | ${pin} | LED: ${act.toLocaleUpperCase()}`);
+                state = 'ON';
+                volt = 'HIGH';
+                console.log(`${req.hostname} | ${pin} | LED: ${state}`);
                 break;
             case 'off':
-                board.digitalWrite(pin, board.LOW);
-                console.log(`${req.hostname} | ${pin} | LED: ${act.toLocaleUpperCase()}`);
+                state = 'OFF';
+                volt = 'LOW';
+                console.log(`${req.hostname} | ${pin} | LED: ${state}`);
                 break;
             default:
                 console.log(`${req.hostname} | ${pin} | LED: INVALID ACT`);
+                return res.status(400).json({
+                    status: 400,
+                    message: `Invalid act ${act}`
+                });
         }
 
+        board.digitalWrite(pin, board[volt]);
+
         res.status(200).json({
             status: 200,
-            message: `Success changed pin ${pin} to state ${act}`
+            message: `Success changed pin ${pin} to state ${state}`
+        });
+    }
+    catch (err) {
+        console.error(err);
+        res.status(500).json({
+            status: 500,
+            message: "Internal Server Error"
+        });
+    }
+};
+
+
+export async function readRgbLed (req: Request, res: Response) {
+    const r: number = Number.parseInt(req.body.r);
+    const g: number = Number.parseInt(req.body.b);
+    const b: number = Number.parseInt(req.body.b);
+
+    const rgbPins: number[] = Object.values({ r, g, b });
+    const pinStates: number[] = [];
+
+    for (let i = 0; i < rgbPins.length; i++) {
+        const pin = rgbPins[i];
+        
+        if (Number.isNaN(pin)) {
+            return res.status(400).json({
+                status: 400,
+                message: `Invalid pin ${pin} param, it should be integer`
+            });
+        }
+    
+        const state: number = await digitalRead(board, pin);
+        pinStates.push(state);
+    }
+
+    return res.status(200).json({
+        status: 200,
+        pin_state: {
+            [r]: pinStates[0],
+            [g]: pinStates[1],
+            [b]: pinStates[2]
+        }
+    });
+}
+
+export async function writeRgbLed (req: Request, res: Response) {
+    const r: ChannelPins = req.body.r;
+    const g: ChannelPins = req.body.b;
+    const b: ChannelPins = req.body.b;
+
+    const rgbLeds: ChannelPins[] = Object.values({ r, g, b });
+
+    try {
+        rgbLeds.forEach((led, i) => {
+            if (Number.isNaN(led.pin)) {
+                return res.status(400).json({
+                    status: 400,
+                    message: `Invalid pin ${led.pin} param, it should be integer`
+                });
+            }
+        
+            switch (led.value) {
+                case 'ON':
+                    board.analogWrite(led.pin, board.HIGH);
+                    console.log(`${req.hostname} | ${led.pin} | LED: ${led.value}`);
+                    break;
+                case 'OFF':
+                    board.analogWrite(led.pin, board.LOW);
+                    console.log(`${req.hostname} | ${led.pin} | LED: ${led.value}`);
+                    break;
+                default:
+                    console.log(`${req.hostname} | ${led.pin} | LED: INVALID VALUE`);
+            }
+        })
+
+        const pins: string[] = rgbLeds.map(c => `${c.pin}, `);
+        const values: string[] = rgbLeds.map(c => `${c.value}, `);
+
+        res.status(200).json({
+            status: 200,
+            message: `Success changed pins ${pins} to state ${values}`
         });
     }
     catch (err) {

src/controller/pin.ts

@@ -0,0 +1,46 @@
+import { Request, Response } from "express";
+import { board, suBoard } from "../setup";
+import { sPinModes } from ".";
+
+export function readPin (req: Request, res: Response) {
+    const pin: number = Number.parseInt(req.params.p);
+
+    if (Number.isNaN(pin)) {
+        return res.status(400).json({
+            status: 400,
+            message: 'Invalid pin param, it should be integer'
+        });
+    }
+
+    const { mode } = board.pins[pin];
+
+    return res.status(200).json({
+        status: 200,
+        state: {
+            used: true
+        },
+        message: `Pin ${pin} is ${mode}`
+    });
+}
+
+export function setPin (req: Request, res: Response) {
+    const pin: number = Number.parseInt(req.params.p);
+    const mode: sPinModes | string = req.params.m.toUpperCase();
+    
+    if (Number.isNaN(pin)) {
+        return res.status(400).json({
+            status: 400,
+            message: 'Invalid pin param, it should be integer'
+        });
+    }
+
+    board.pinMode(pin, board.MODES[mode]);
+
+    suBoard.PINS.pwm.push(pin);
+    suBoard.sort();
+
+    return res.status(200).json({
+        status: 200,
+        message: `Pin ${pin} setted as ${mode}`
+    });
+}

src/index.ts

@@ -5,6 +5,7 @@ import chalk from 'chalk';
 
 import { board, suBoard, comport } from './setup';
 
+import { isBoardConnected } from './middleware/connection';
 import view from './routes/view';
 import api from './routes/api';
 
@@ -19,10 +20,11 @@ app.use(express.json());
 app.use(express.static('client'));
 
 app.use('/', view);
-app.use('/api-arduino', api);
+app.use('/api-arduino', isBoardConnected, api);
 
 app.listen(port, host, () => {
-    console.log(`Server is running in ${host} at port ${port} 🗣️🗣️🗣️`);
+    console.log(`Server is connected and running in ${host} at port ${port} 🗣️🗣️🗣️`);
+    console.log(`Press CTRL+C to exit`);
     console.log(`URL: http://${host}:${port}/\n`);
     console.log(chalk.yellow(`Connecting to Board`));
 

src/middleware/pin.ts

@@ -0,0 +1,22 @@
+import { NextFunction, Request, Response } from "express";
+import { suBoard } from "../setup";
+
+export function isPinBeingUsed(req: Request, res: Response, next: NextFunction) {
+    const pin: number = Number.parseInt(req.params.p);
+    
+    if (Number.isNaN(pin)) {
+        return res.status(400).json({
+            status: 400,
+            message: 'Invalid pin param, it should be integer'
+        });
+    }
+
+    if (suBoard.PINS.pwm.indexOf(pin) != -1) {
+        return res.status(400).json({
+            status: 400,
+            message: `Pin ${pin}, is used`
+        });
+    }
+
+    next();
+}

src/promises/index.js

@@ -1,9 +0,0 @@
-function digitalRead (board, pin) {
-    return new Promise((resolve, reject) => {
-        board.digitalRead(pin, (val) => {
-            resolve(val);
-        });
-    });
-}
-
-module.exports = { digitalRead };

src/promises/index.ts

@@ -0,0 +1,23 @@
+import Board, { PIN_MODE } from "firmata";
+
+export function digitalRead (board: Board, pin: number): Promise<PIN_MODE | number> {
+    return new Promise((resolve, reject) => {
+        board.digitalRead(pin, (val) => {
+            resolve(val);
+        });
+        setTimeout(() => {
+            reject(new Error("Reading digital timeout"));
+        }, 5000);
+    });
+}
+
+export function analogRead (board: Board, pin: number): Promise<number> {
+    return new Promise((resolve, reject) => {
+        board.analogRead(pin, (val) => {
+            resolve(val);
+        })
+        setTimeout(() => {
+            reject(new Error("Reading analog timeout"));
+        }, 5000);
+    })
+}

src/routes/api.ts

@@ -1,7 +1,7 @@
 import { Response } from "express";
 import { Router } from "express";
-import { readLed, writeLed } from "../controller/led";
-import { isBoardConnected } from "../middleware/connection";
+import { readLed, readRgbLed, writeLed, writeRgbLed } from "../controller/led";
+import { readPin, setPin } from "../controller/pin";
 
 const router = Router();
 
@@ -9,7 +9,13 @@ router.get('/hello', (req, res: Response) => {
     res.status(200).send("Hello");
 })
 
-router.get('/led/:p', isBoardConnected, readLed);
-router.patch('/led/:p/:a', isBoardConnected, writeLed);
+router.get('/pin/:p', readPin);
+router.patch('/pin/:p/:m', setPin);
+
+router.get('/led/:p', readLed);
+router.patch('/led/:p/:a', writeLed);
+
+router.get('/rgb-led', readRgbLed);
+router.patch('/rgb-led/', writeRgbLed);
 
 export default router;

src/setup/index.ts

@@ -1,16 +1,7 @@
 import Firmata from 'firmata';
+import { SuBoard } from './support';
 
-export const comport: string = '/dev/ttyUSB0';
+export const comport: string = '/dev/ttyUSB1';
 export const board: Firmata = new Firmata(comport);
 
-export const suBoard = {
-    connected: false,
-    PIN: {
-        servo: 0,
-        rgb_led: {
-            r: 10,
-            g: 9,
-            b: 8
-        }
-    }
-}
+export const suBoard: SuBoard = new SuBoard();

src/setup/support.ts

@@ -0,0 +1,20 @@
+export interface SupportBoard {
+    connected: boolean,
+    PINS: {
+        pwm: number[],
+        analog: number[],
+    }
+    sort: () => void
+}
+
+export class SuBoard implements SupportBoard {
+    public connected = false;
+    public PINS = {
+        pwm: [],
+        analog: []
+    };
+    public sort() {
+        this.PINS.pwm = this.PINS.pwm.sort((a, b) => b - a);
+        this.PINS.analog = this.PINS.analog.sort((a, b) => b - a);
+    }
+}

test/serial/analogReadDigital.ts

@@ -0,0 +1,17 @@
+import Firmata, { PIN_MODE, PIN_STATE } from 'firmata';
+
+const board = new Firmata('/dev/ttyUSB2');
+
+board.on('ready', async () => {
+    // board.analogWrite(0, 255);
+    // board.analogWrite(1, 255);
+    // board.analogWrite(2, 255);
+
+    board.analogRead(0, (val) => {
+        console.log(val);
+    })
+
+    while (true) {
+        await new Promise (resolve => setTimeout(resolve, 90));
+    }
+})

test/serial/monitoringAllPins.ts

@@ -0,0 +1,18 @@
+import Firmata from 'firmata';
+
+const board = new Firmata('/dev/ttyUSB2');
+
+board.on('ready', async () => {
+    board.analogRead(2, (val) => {
+        console.log(board.analogPins[2]);
+        const output = board.pins.map((p, i) => {
+            return `Pin ${i}: ${p.value}`
+        }).join(", ");
+    
+        console.log(output);
+    })
+
+    while (true) {
+        await new Promise(resolve => setTimeout(resolve, 200));
+    }
+})

test/serial/readResistor.ts

@@ -0,0 +1,11 @@
+import Firmata from 'firmata';
+
+const board = new Firmata('/dev/ttyUSB1');
+
+board.on('ready', () => {
+    board.pinMode(0, Firmata.PIN_MODE.INPUT);
+
+    board.analogRead(0, (val) => {
+        console.log(val);
+    })
+})

tsconfig.json

@@ -6,5 +6,5 @@
         "sourceMap": false,
         "outDir": "dist"
     },
-    "include": ["src/**/*"]
+    "include": ["src/**/*", "test/**/*"]
 }